Re: [Linux-31] Message au boot: SMART Hard Drive detects Error.

["Christophe V." <tx1138 AT gmail.com>]

Bonjour,

Voici le résultat avec l'option "a"

J'ai entrepris de revoir la machine quand j'ai regardé le nombre de partitions qui s'y trouvaient !

Et de voir le message d'erreur SMART au boot ..

Le PC était sous Windows 8,

Et une installation d'un Windows 7 sans avoir partitionné le HD !

Il est impossible de faire une installation Windows neuve , un disk dur est déjà commandé

Christophe

root@sysresccd /root % smartctl -a /dev/sda
smartctl 6.4 2015-06-04 r4109 [i686-linux-4.9.24-std500-i586] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi/HGST Travelstar 5K750
Device Model:     Hitachi HTS547575A9E384
Serial Number:    J1140021DW3NGJ
LU WWN Device Id: 5 000cca 72bda6b43
Firmware Version: JE4OA50B
User Capacity:    750,156,374,016 bytes [750 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Jan  4 13:43:10 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (   45) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 199) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   095   095   062    Pre-fail  Always       -       65546
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   192   192   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   097   097   000    Old_age   Always       -       5904
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   093   093   000    Old_age   Always       -       3397
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       5867
160 Unknown_Attribute       0x003b   100   100   001    Pre-fail  Always       -       0
191 G-Sense_Error_Rate      0x000a   099   099   000    Old_age   Always       -       131073
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       121
193 Load_Cycle_Count        0x0012   093   093   000    Old_age   Always       -       79203
194 Temperature_Celsius     0x0002   230   230   000    Old_age   Always       -       26 (Min/Max 12/46)
196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       2700
197 Current_Pending_Sector  0x0022   040   040   000    Old_age   Always       -       1568
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       74

SMART Error Log Version: 1
ATA Error Count: 58350 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 58350 occurred at disk power-on lifetime: 3396 hours (141 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 68 f8 dd c8 03  Error: IDNF at LBA = 0x03c8ddf8 = 63495672

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 48 d0 7a c9 40 00      00:14:23.081  WRITE FPDMA QUEUED
  61 40 40 90 75 c9 40 00      00:14:23.081  WRITE FPDMA QUEUED
  61 40 38 50 70 c9 40 00      00:14:23.081  WRITE FPDMA QUEUED
  61 40 30 10 6b c9 40 00      00:14:23.081  WRITE FPDMA QUEUED
  61 40 28 d0 65 c9 40 00      00:14:23.081  WRITE FPDMA QUEUED

Error 58349 occurred at disk power-on lifetime: 3396 hours (141 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 a0 10 24 c9 03  Error: IDNF at LBA = 0x03c92410 = 63513616

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 48 10 80 c9 40 00      00:14:20.417  WRITE FPDMA QUEUED
  61 40 40 90 60 c9 40 00      00:14:20.417  WRITE FPDMA QUEUED
  61 f0 38 60 54 c9 40 00      00:14:20.417  WRITE FPDMA QUEUED
  61 40 30 50 5b c9 40 00      00:14:20.417  WRITE FPDMA QUEUED
  60 08 28 58 42 da 40 00      00:14:20.417  READ FPDMA QUEUED

Error 58348 occurred at disk power-on lifetime: 3396 hours (141 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 68 f8 dd c8 03  Error: IDNF at LBA = 0x03c8ddf8 = 63495672

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 48 d0 7a c9 40 00      00:14:17.737  WRITE FPDMA QUEUED
  61 40 40 90 75 c9 40 00      00:14:17.737  WRITE FPDMA QUEUED
  61 40 38 50 70 c9 40 00      00:14:17.737  WRITE FPDMA QUEUED
  61 40 30 10 6b c9 40 00      00:14:17.737  WRITE FPDMA QUEUED
  61 40 28 d0 65 c9 40 00      00:14:17.737  WRITE FPDMA QUEUED

Error 58347 occurred at disk power-on lifetime: 3396 hours (141 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 a0 10 24 c9 03  Error: IDNF at LBA = 0x03c92410 = 63513616

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 48 10 80 c9 40 00      00:14:15.069  WRITE FPDMA QUEUED
  61 40 40 90 60 c9 40 00      00:14:15.069  WRITE FPDMA QUEUED
  61 f0 38 60 54 c9 40 00      00:14:15.069  WRITE FPDMA QUEUED
  61 40 30 50 5b c9 40 00      00:14:15.069  WRITE FPDMA QUEUED
  60 08 28 58 42 da 40 00      00:14:15.069  READ FPDMA QUEUED

Error 58346 occurred at disk power-on lifetime: 3396 hours (141 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 68 f8 dd c8 03  Error: IDNF at LBA = 0x03c8ddf8 = 63495672

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 48 d0 7a c9 40 00      00:14:12.405  WRITE FPDMA QUEUED
  61 40 40 90 75 c9 40 00      00:14:12.405  WRITE FPDMA QUEUED
  61 40 38 50 70 c9 40 00      00:14:12.405  WRITE FPDMA QUEUED
  61 40 30 10 6b c9 40 00      00:14:12.405  WRITE FPDMA QUEUED
  61 40 28 d0 65 c9 40 00      00:14:12.405  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@sysresccd /root %

Le 4 janvier 2018 à 13:17, jdanield <linux-31 AT culte.org> a écrit :

Le 04/01/2018 à 13:07, "Christophe V." (via linux-31 Mailing List) a écrit :

Bonjour,
Voici le resultat de smartctl:

Drive failure expected in less than 24 hours. SAVE ALL DATA.

ça, ca fait peur :-)) tu as une sauvegarde?

pour le reste j'aurais plutôt utilisé smartctl -a (pour avoir tout)

mais Pascal te dira mieux que moi ce que ca veut dire :-)

jdd

--
http://dodin.org

--

Debian Jessie  3.16.0-4-amd64 / Xorg 1:7.7+7  & Xfce 4.10
http://www.debian.org # http://fr.wikipedia.org/wiki/Obsolescence
https://soutien.laquadrature.net/
http://gnutux.free.fr # Il faut dire GNU/Linux :) # www.culte.org
--
GNU/Linux : May the Force be with you !