Objet : Discussions sur le logiciel libre
Archives de la liste
- From: Christophe VANHOUTTE <tx1138 AT gmail.com>
- To: jdanield <jdanield AT free.fr>
- Cc: Linux 31 <linux-31 AT culte.org>
- Subject: Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3
- Date: Wed, 9 Sep 2020 13:39:20 +0000
- Authentication-results: pic2s.le-pic.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i= AT gmail.com header.b="Q94ERHlD"; dkim-atps=neutral
Voici le résultat de smartctl
Ca parle bien
Au dernier tentative de démarrage
c4etait chaque fois fsck une par ligne
un vrai défilé
root@sysresccd ~]# smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.44-1-lts] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.5
Device Model: ST9750420AS
Serial Number: 5WS02JLD
LU WWN Device Id: 5 000c50 029e598be
Firmware Version: 0001SDM1
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Sep 9 13:31:15 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 088 087 006 Pre-fail Always - 218214885
3 Spin_Up_Time 0x0003 100 100 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 088 088 020 Old_age Always - 12634
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 11
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 195499546
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6048
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 6126
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1377
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 10
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 055 044 045 Old_age Always In_the_past 45 (Min/Max 45/45 #7)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 185
193 Load_Cycle_Count 0x0032 045 045 000 Old_age Always - 111460
194 Temperature_Celsius 0x0022 045 056 000 Old_age Always - 45 (0 9 0 0 0)
195 Hardware_ECC_Recovered 0x001a 119 099 000 Old_age Always - 218214885
197 Current_Pending_Sector 0x0012 085 085 000 Old_age Always - 312
198 Offline_Uncorrectable 0x0010 085 085 000 Old_age Offline - 312
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5574 (77 202 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3487735662
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2003149320
250 Read_Error_Retry_Rate 0x0000 100 001 000 Old_age Offline - 7
251 Unknown_Attribute 0x0000 100 001 000 Old_age Offline - 1
252 Unknown_Attribute 0x0000 100 001 000 Old_age Offline - 1
SMART Error Log Version: 1
ATA Error Count: 1378 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1378 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 c0 00 Error: UNC at LBA = 0x00c00800 = 12584960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 00 08 c0 40 00 00:02:37.122 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 00:02:37.121 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:37.121 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:37.120 IDENTIFY DEVICE
ef 90 03 00 00 00 a0 00 00:02:37.120 SET FEATURES [Disable SATA feature]
Error 1377 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 c0 00 Error: UNC at LBA = 0x00c00800 = 12584960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 00 08 c0 40 00 00:02:33.723 READ FPDMA QUEUED
60 00 00 f0 2a 00 40 00 00:02:33.722 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:33.439 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:33.434 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:33.432 READ FPDMA QUEUED
Error 1376 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 c0 00 Error: UNC at LBA = 0x00c00800 = 12584960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 ff ff ff 4f 00 00:02:29.807 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:29.801 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:29.799 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:29.792 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 00:02:29.790 READ FPDMA QUEUED
Error 1375 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 00 02 Error: UNC at LBA = 0x02000800 = 33556480
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 00 08 c0 4a 00 00:02:25.029 READ FPDMA QUEUED
60 00 08 80 08 80 4a 00 00:02:25.027 READ FPDMA QUEUED
60 00 10 80 08 00 46 00 00:02:25.024 READ FPDMA QUEUED
60 00 18 00 08 40 46 00 00:02:25.020 READ FPDMA QUEUED
60 00 08 80 08 40 46 00 00:02:25.014 READ FPDMA QUEUED
Error 1374 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 40 04 Error: UNC at LBA = 0x04400800 = 71305216
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 18 00 08 80 46 00 00:02:21.357 READ FPDMA QUEUED
60 00 08 80 08 40 46 00 00:02:21.356 READ FPDMA QUEUED
60 00 18 00 08 40 46 00 00:02:21.351 READ FPDMA QUEUED
60 00 10 80 08 00 46 00 00:02:21.350 READ FPDMA QUEUED
60 00 18 00 08 00 46 00 00:02:20.950 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 6048 12584960
# 2 Short offline Completed: read failure 90% 6048 12584960
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@sysresccd ~]#
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.44-1-lts] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.5
Device Model: ST9750420AS
Serial Number: 5WS02JLD
LU WWN Device Id: 5 000c50 029e598be
Firmware Version: 0001SDM1
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Sep 9 13:31:15 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 088 087 006 Pre-fail Always - 218214885
3 Spin_Up_Time 0x0003 100 100 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 088 088 020 Old_age Always - 12634
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 11
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 195499546
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6048
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 6126
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1377
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 10
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 055 044 045 Old_age Always In_the_past 45 (Min/Max 45/45 #7)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 185
193 Load_Cycle_Count 0x0032 045 045 000 Old_age Always - 111460
194 Temperature_Celsius 0x0022 045 056 000 Old_age Always - 45 (0 9 0 0 0)
195 Hardware_ECC_Recovered 0x001a 119 099 000 Old_age Always - 218214885
197 Current_Pending_Sector 0x0012 085 085 000 Old_age Always - 312
198 Offline_Uncorrectable 0x0010 085 085 000 Old_age Offline - 312
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5574 (77 202 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3487735662
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2003149320
250 Read_Error_Retry_Rate 0x0000 100 001 000 Old_age Offline - 7
251 Unknown_Attribute 0x0000 100 001 000 Old_age Offline - 1
252 Unknown_Attribute 0x0000 100 001 000 Old_age Offline - 1
SMART Error Log Version: 1
ATA Error Count: 1378 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1378 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 c0 00 Error: UNC at LBA = 0x00c00800 = 12584960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 00 08 c0 40 00 00:02:37.122 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 00:02:37.121 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:37.121 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:37.120 IDENTIFY DEVICE
ef 90 03 00 00 00 a0 00 00:02:37.120 SET FEATURES [Disable SATA feature]
Error 1377 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 c0 00 Error: UNC at LBA = 0x00c00800 = 12584960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 00 08 c0 40 00 00:02:33.723 READ FPDMA QUEUED
60 00 00 f0 2a 00 40 00 00:02:33.722 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:33.439 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:33.434 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:33.432 READ FPDMA QUEUED
Error 1376 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 c0 00 Error: UNC at LBA = 0x00c00800 = 12584960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 ff ff ff 4f 00 00:02:29.807 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:29.801 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:29.799 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:02:29.792 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 00:02:29.790 READ FPDMA QUEUED
Error 1375 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 00 02 Error: UNC at LBA = 0x02000800 = 33556480
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 00 08 c0 4a 00 00:02:25.029 READ FPDMA QUEUED
60 00 08 80 08 80 4a 00 00:02:25.027 READ FPDMA QUEUED
60 00 10 80 08 00 46 00 00:02:25.024 READ FPDMA QUEUED
60 00 18 00 08 40 46 00 00:02:25.020 READ FPDMA QUEUED
60 00 08 80 08 40 46 00 00:02:25.014 READ FPDMA QUEUED
Error 1374 occurred at disk power-on lifetime: 6047 hours (251 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 08 40 04 Error: UNC at LBA = 0x04400800 = 71305216
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 18 00 08 80 46 00 00:02:21.357 READ FPDMA QUEUED
60 00 08 80 08 40 46 00 00:02:21.356 READ FPDMA QUEUED
60 00 18 00 08 40 46 00 00:02:21.351 READ FPDMA QUEUED
60 00 10 80 08 00 46 00 00:02:21.350 READ FPDMA QUEUED
60 00 18 00 08 00 46 00 00:02:20.950 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 6048 12584960
# 2 Short offline Completed: read failure 90% 6048 12584960
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@sysresccd ~]#
christophe
Le mer. 9 sept. 2020 à 10:35, jdanield <linux-31 AT culte.org> a écrit :
Le 09/09/2020 à 12:27, Christophe VANHOUTTE (via linux-31 Mailing List)
a écrit :
> Bonjour,
> J'ai dans les mains un PC portable A/SUS X52J (i7)
et quelle est la question?
si tu as des doutes sur le disque dur, il faut arrêter de travailler
avec et utiliser une distro live...
d'abord appeler smartctl, pour vérifier, ensuite s'il est bien douteux,
quand c'est possible, clone avec dd (ou ddrescue) vers un autre disque,
puis tests
jdd
--
http://dodin.org
Vous pouvez vous désabonner de cette liste en cliquant sur: https://sympa.culte.org/sympa/auto_signoff/linux-31/tx1138 AT gmail.com
--
Debian Jessie 3.16.0-4-amd64 / Xorg 1:7.7+7 & Xfce 4.10
http://www.debian.org # http://fr.wikipedia.org/wiki/Obsolescence
https://soutien.laquadrature.net/
http://gnutux.free.fr # Il faut dire GNU/Linux :) # www.culte.org
--
GNU/Linux : May the Force be with you !
http://www.debian.org # http://fr.wikipedia.org/wiki/Obsolescence
https://soutien.laquadrature.net/
http://gnutux.free.fr # Il faut dire GNU/Linux :) # www.culte.org
--
GNU/Linux : May the Force be with you !
- [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, Christophe VANHOUTTE, 09/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, jdanield, 09/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, Christophe VANHOUTTE, 09/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, jdanield, 09/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, Christophe VANHOUTTE, 09/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, Pascal Hambourg, 09/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, Christophe VANHOUTTE, 10/09/2020
- Re: [Linux-31] probleme ' busybox '' sur Linux MINT MATE 19.3, jdanield, 09/09/2020
Archives gérées par MHonArc 2.6.19+.